How To Console Into Cisco Switch. How to Backup Cisco Switch/Router Configuration using Putty YouTube Connect a Modem to the Console Port on Catalyst Switches Connect the other end of the console cable to a serial port on your computer or to a USB-to-serial adapter
Cisco Catalyst 2960L Series 8Port and 16Port Switch Hardware from www.cisco.com
-This switch has no IP-addresses configured.-There is no serial console port.-I don't have a mini-USB cable.-There is an RJ45 console port on the lower left corner of the front.-I have a USB-to-RJ45 console cable To make a Telnet connection to the switch, perform these steps:
Cisco Catalyst 2960L Series 8Port and 16Port Switch Hardware
Make sure that the rollover or straight-through cable terminates into the console port on the Catalyst switch First, connect the PC to the Switch using a console cable The PC port will be the RS-232 and the switch port will be the Console port
HOW TO CONNECT CISCO SWITCH USING CONSOLE CABLE & PUTTY. Step 2: Check the COM Port number: => Go Device Manager->Port (COM & LPT)-> check USB Serial Port (COM port) First, connect the PC to the Switch using a console cable
How to Connect Cisco Router & Switch Using Console Cable Cisco Packet. To connect with Telnet or SSH, you need to know the hostname or IP address of the switch The PC port will be the RS-232 and the switch port will be the Console port